Fittings with a Thicker Bell for Ultimate Toughness and Durability
Blue Brute® fittings are injection moulded with a wall thickness up to 125% thicker than DR18 wall thickness, making them even tougher for pressure applications. Moulded up to 12”, larger sizes are fabricated.
Our custom-made fabricated fittings are also wrapped with a tough layer of fibreglass for extra protection.
product details
Engineered for Strength
- The precise tolerances of Blue Brute® systems ensure tight joints capable of withstanding pressures three times the pressure class of the pipe
- The results are bottle-tight joints that keep potable water clean. And the smooth interior surface of Blue Brute® pipe and fittings virtually eliminates build-up from adhering to its surface providing better water quality and flow capacity
- Made of non-corroding PVC, Blue Brute® fittings will not rust or corrode in aggressive soils. Consequently, costly sacrificial anodes and expensive protective coatings commonly used with metal fittings are not required
specifications
Exceeding the Toughest Industry Standards
At IPEX, we leave nothing to chance, ensuring quality is built-in, instead of simply being inspected. From rigorous dimensional, material, burst pressure, fusion, and qualification tests, our PVC pressure pipe fittings are guaranteed to be of the highest quality
All Blue Brute® fittings are shipped with standard gaskets that accept cast-iron-sized PVC pipe. Transition gaskets for IPS-sized pipe are an option for all sizes. For applications where fittings must be buried in soil with hydrocarbon contamination, Nitrile gaskets are available
resources
Learn more about Blue Brute® PVC Pressure Pipe fittings
Our resources section covers everything you need to know about Blue Brute® PVC pressure pipe fittings. Take a look at our most popular resources below
Product Details
FABRICATED FITTINGS
Fabricated fittings shall be made from segments of AWWA C900 PVC pipe. Segments are bonded together and may be over-wrapped with fibreglass-reinforced polyester. The pressure class must match the pipe. The fittings must meet the requirements of CSA B137.3.
Specifications
PVC fittings
Bell OD for Joint Restraint Selection
90° Elbow
45° Elbow
22-1/2° Elbow
11-1/4° Elbow
Tee
Hammer Tee
Hydrant Tee
Reducing Adapter Spigot x Bell
Coupling
Single Tapped Coupling
Double Tapped Coupling
Plug
Tapped Plug
4 – 12” (100 – 305 mm)
CSA B137.2 Certified
AWWA C900
AWWA C907
FM 1612 Approved
UL 1285 Listed
NSF Std. 61 Certified
BNQ NQ 3624-250*
Municipal Transmission Mains
Municipal Distribution Mains
Sewer Force Mains
Fire Lines
Industrial Process Lines
Irrigation Piping